| EE631305D/631483XD Timken Tapered Roller Bearings | r1,2 min.:3.3 mm; db min.:167.5 mm; ra max.:3.3 mm; Calculation factor e:0.35; Mass bearing:3.71 kg; a:38.342 mm; Fatigue load limit Pu:45.5 kN; Reference speed:2400 r/min; Basic static load rating C0:480 kN; d1 ≈:180.4 mm; Ca min.:5 mm; da max.:166 mm; Basic dynamic load rating C:251 kN; Da min.:186 mm; B:41.275 mm; Db min.:197 mm; T:41.275 mm; rb max.:3.3 mm; Dimension series:LM 330400; Da max.:189 mm; |
| NP305400/NP399131 Timken Tapered Roller Bearings | B:31.00 mm; d:65.000 mm; Grease Speed Rating n1:3600 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:14000 N; Basic Dynamic Radial Load Rating C:35100 N; Fillet Radius ra:1.50 mm; |
| EE244181D/244236CD Timken Tapered Roller Bearings | Oil Speed Rating n2:2300 rpm; Basic Dynamic Radial Load Rating C:238000 N; Fillet Radius rb:1.00 mm; D:310.0000 mm; d:200.000 mm; Grease Speed Rating n1:0 rpm; Fillet Radius ra:2.00 mm; B:51.00 mm; Basic Static Radial Load Rating Co:320000 N; |
| LM287849DGW/LM287810CD Timken Tapered Roller Bearings | Sealed Speed Rating n3:6400 rpm; D:80.0000 mm; d:25.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Dynamic Radial Load Rating C:35800 N; B:21.00 mm; Basic Static Radial Load Rating Co:19300 N; |
| EE291176D/291751CD Timken Tapered Roller Bearings | d:25.000 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:35800 N; D:80.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:9400 rpm; Grease Speed Rating Open/Shielded n1:7700 rpm; Basic Static Radial Load Rating Co:23600 N; B:21.00 mm; |
| NP720022 Timken Tapered Roller Bearings | P90°:138 kN; ba:67.469 mm; Appropriate attachment bolt size G:1 in; J min.:431.8 mm; Mass pillow block:91.3 kg; Max. speed for PosiTrac Plus seal:1075 r/min; PosiTrac Plus contact element (dc shaft position):B10724-117; A1:158.75 mm; H:320.675 mm; Stabilizing ring:SR-0-24; Labyrinth ring (dc shaft position):LOR 119; N1:28.575 mm; da:120 mm; db:134.938 mm; Eye bolt:2 x 3/8-16 UNC; J max.:463.55 mm; |
| NP348929/NP193569 Timken Tapered Roller Bearings | G:279.502 mm; B5:47.092 mm; d1:265.113 mm; Sleeve:S 3256x10.7/16; Threads per inch:6; d:280 mm; d3 max.:330.327 mm; Mass adapter sleeve assembly:27 kg; B:38.354 mm; B1:227 mm; Hydraulic nut:HMVC 56E; |
| L882449DGW/L882410CD Timken Tapered Roller Bearings | S:0.794 mm; Mass bearing unit:8.62 kg; A:88.9 mm; Basic dynamic load rating C:193 kN; J max.:225.425 mm; da:63.5 mm; s:32.941 mm; Limiting speed:3100 r/min; B:65.484 mm; L:266.7 mm; H2:41.275 mm; J min.:209.55 mm; Attachment bolt diameter G:15.875 mm; H:144.463 mm; J1:47.625 mm; H1:69.85 mm; |
| L770847DGW/L770810D Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:114000 N; Fillet Radius ra:2.50 mm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; d:75.000 mm; Accessories:Seal & Snap-Ring; Sealed Speed Rating n3:2500 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; B:45.00 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; |
| NP681156 Timken Tapered Roller Bearings | Design variant/feature:NNUB.5/W33WI; C:357.5 mm; rb max.:3 mm; d:690 mm; F:767.5 mm; Reference speed:400 r/min; r1,2 min.:4 mm; B:550 mm; ra max.:3 mm; Da max.:960 mm; Fatigue load limit Pu:1830 kN; da min.:724 mm; Limiting speed:600 r/min; K:9 mm; Mass bearing:1045 kg; b:22.3 mm; Basic static load rating C0:27000 kN; D:980 mm; db min.:774 mm; r3,4 min.:7.5 mm; |
| NP414928/NP835117 Timken Tapered Roller Bearings | R1:21 mm; Recommended tightening torque for grub screw:4 N·m; J6:98.5 mm; Basic static load rating C0:11.2 kN; s1:30.1 mm; Db1:77 mm; A3:3.2 mm; Da:76.2 mm; L:83 mm; Hexagonal key size for grub screw N:3.175 mm; B1:48.4 mm; J7:12.5 mm; N4:2 mm; H:141.5 mm; T:50.1 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:32.5 mm; Limiting speed:1200 r/min; A5:20 mm; RG:1/4-28 UNF; |
| NP296291/NP209728 Timken Tapered Roller Bearings | B:70 mm; Specific static load factor K0:20 N/mm²; D:70 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.05; Mass bushing:0.81 kg; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; d:50 mm; Specific dynamic load factor K:10 N/mm²; |