| No. | Brand | d | F | A | J | H | L | w | b |
| 61809 | skf | - | - | - | - | - | - | - | - |
| bth 1024 | skf | - | - | - | - | 93 mm | - | - | - |
| 6307 2rs | skf | - | - | - | - | - | - | - | - |
| 63007 | skf | 35.000 mm | - | - | - | - | - | - | - |
| syj 75 tf | skf | 60.000 mm | - | - | - | - | - | - | - |
| mrc | skf | - | - | - | - | - | - | - | 5 mm |
| rms13 | skf | 130.000 mm | - | - | - | - | - | - | - |
| 22213 | skf | 80.000 mm | - | - | - | - | - | - | - |
| 7203 | skf | 160.000 mm | - | - | - | - | - | - | - |
| 7304 bep | skf | - | - | - | - | - | - | - | - |
| 1201 etn9 | skf | 420.000 mm | - | - | - | - | - | - | - |
| 6201 2rs | skf | - | - | - | - | - | - | - | - |
| 7203 bep | skf | - | - | - | - | - | - | - | 6 mm |
| 6305 c3 | skf | 17.000 mm | - | - | - | - | - | - | - |
| 6204 2rs1 | skf | 12.000 mm | - | - | - | - | - | - | - |
| nj 203 | skf | 25.000 mm | - | - | - | - | - | - | - |
| 6304 2rs | skf | 85 mm | - | - | - | - | - | - | - |
| 6205 2rs c3 | skf | - | 238.65 mm | - | - | - | - | - | - |
| 62203 | skf | 50.000 mm | - | - | - | - | - | - | - |
| 2205 | skf | 600 mm | - | - | - | - | - | - | - |
| lht23 | skf | - | - | - | - | - | - | - | - |
| ge 20 c | skf | - | - | - | - | - | - | - | - |
| 6204 2z c3 | skf | 9.500 mm | - | - | - | - | - | - | - |
| 7212 | skf | - | - | - | - | - | - | - | 15 mm |
| 98206 | skf | 360 mm | - | 9 mm | - | - | - | - | - |
| 110 mm x 200 mm x 53 mm skf 2222 bearing | Da max.:853 mm; Lubricant:Maintenance free &nd; r1 min.:3 mm; da max.:722 mm; Specific static load factor K0:500 N/mm²; dk:785 mm; Basic dynamic load rating C:55000 kN; D:900 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Basic static load rating C0:91500 kN; Size (mm):110 mm x 200 mm x 53 mm ; |
| skf 51108 bearing | Housing:SAFS 216; R2:21.431 mm; Initial grease fill:175.77 g; Taconite seal (dc shaft position):TER 54; ba:34.131 mm; Ca:42.799 mm; H2:31.75 mm; P120°:49.8 kN; Mass pillow block:20.4 kg; Cap bolt, SAE grade:8; |
| skf lfk 608 2z bearing | Grease Speed Rating Open/Shielded n1:9000 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; B:12.00 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:14000 N; Fillet Radius ra:0.64 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:10800 N; d:45.000 mm; D:68.0000 mm; |
| 20 mm x 47 mm x 14 mm skf nu 204 ecp bearing | B:45.00 mm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:199000 N; D:200.0000 mm; d:95.000 mm; Basic Static Radial Load Rating Co:180000 N; Size (mm):20 mm x 47 mm x 14 mm ; |
| skf zz c3 bearing | d1:165.1 mm; B4:28.042 mm; Sleeve:S 136x6.1/2; B:28.042 mm; B1:163.728 mm; d3 max.:230.327 mm; G:179.476 mm; d:180 mm; Hydraulic nut:HMVC 36E; Lock washer:W 36; |
| 100 mm x 180 mm x 63 mm skf 33220 bearing | Appropriate attachment bolt size G:1.5 in; db:242.887 mm; RG:1 NPT; ba:90.487 mm; da:220 mm; Ca:117.805 mm; Cap bolt recommended tightening torque:4284.4 N·m; Lock washer:W 44; dc:211.137 mm; Da:399.999 mm; Size (mm):100 mm x 180 mm x 63 mm ; |
| 50 mm x 90 mm x 23 mm skf 22210 ek bearing | D1 ≈:333 mm; D:370 mm; B1:161 mm; da max.:290 mm; Da max.:353 mm; Basic dynamic load rating C:1900 kN; db min.:233 mm; Fatigue load limit Pu:245 kN; Ca min.:3.5 mm; Operating clearance factor k2:0.097; Size (mm):50 mm x 90 mm x 23 mm ; |
| skf pa9a bearing | Ca:45.796 mm; P180°:14.7 kN; Cap bolt, SAE grade:8; N1:19.05 mm; J min.:187.325 mm; J max.:200.025 mm; Taconite seal (dc shaft position):TER 20; Lock nut:N 09; Housing:SAF 309; Cap bolt recommended tightening torque:149.1 N·m; |
| skf 6208 zz c3 bearing | d:90.000 mm; B:43.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:3400 rpm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Static Radial Load Rating Co:160000 N; Fillet Radius ra:2.50 mm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:157000 N; |
| skf 6202 2rs bearing | D:190 mm; r1,2 min.:2 mm; B:16.5 mm; Mass housing washer:2.44 kg; D1:113 mm; |
SKF Energy Efficient (E2) bearings
Because they exhibit ultra low friction, SKF Energy Efficient (E2) bearings offer an excellent way to reduce energy consumption. Because they can run cooler
Longer life and lower energy use with SKF Sealed Energy
Oct 1, 2014 - SKF is supporting this ambition with a range of energy-efficient products, the latest of which is the SKF Sealed Energy Efficient (E2) deep
SKF Energy Efficient (E2 design) tapered roller bearings
The SKF Energy Efficient (E2 design) tapered roller bearings belong to SKF E2 performance class, providing at least 30% less friction than corresponding
SKF Energy Efficient (E2) ball bearings and units
To meet the ever-increasing demand to reduce friction and energy use, SKF E2 insert bearings are characterized by a frictional moment that is at least 50%
SKF Energy Efficient spherical roller bearings (E2)
The SKF Energy Efficient spherical roller bearings (E2) belong to the SKF E2 performance class, providing at least 30% less friction than corresponding standard
SKF Energy Efficient deep groove ball bearings
When it comes to bearings, lower friction means less energy use. Shielded and sealed SKF E2 deep groove ball bearings cut bearing friction losses by. 30–50%
SKF Energy Efficient deep groove ball bearings
SKF Energy Efficient (E2) bearings have been optimized for reduced energy use, increased service life and reduced total cost of ownership in many industrial
SKF Energy Efficient deep groove ball bearings
SKF Energy Efficient (E2) deep groove ball bearings can provide more than twice the service life while reducing energy use and total cost of ownership. Design
Larger SKF E2 bearings for electric motor rebuild
SKF now offers deep groove ball bearing sizes up to E2.6316-2Z/C3, appropriate for electric motors up to IEC frame size 355 (NEMA frame size 449TS)
skf e2 bearing Video