| No. | Brand | S | G | B | e | C | d | D | t |
| 15 | iso | - | Tr400x5 | - | - | 52 mm | - | - | 9 mm |
| din 281 | iso | - | - | 107.75 | - | - | - | 300 | - |
| 492 | iso | - | - | - | - | - | - | - | - |
| 16281 | iso | - | - | - | - | - | - | 95 mm | - |
| din 12240 | iso | 39.7 mm | - | - | - | - | 90 mm | - | - |
| 15243 | iso | - | - | - | - | - | - | - | - |
| 12240 | iso | - | - | 35 | - | - | 68 | 74 | - |
| 5753 | iso | - | - | 30.3 mm | 0.34 | - | - | - | - |
| 281 | iso | - | - | - | - | - | - | - | - |
| iso 281 bearing | C1 - Dynamic Radial Rating (1 million revolutions)1:206000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:53300 lbf; C0 - Static Radial Rating:416000 lbf; da - Cone Frontface Backing Diameter:10.73 in; Series:M249700; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:92800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:358000 lbf; Design Units:Imperial; |
| iso din 12240 bearing | A2:96.3 mm; A1:25 mm; Designation of bearing:UC218G2; N:23mm; L:235 mm; Weight:11.35 kg; Designation of housing:F218-; T max.:100 °C; S:39.7 mm; d:90 mm; |
| iso 16281 bearing | D1:62 mm; D:95 mm; d1:95 mm; Inventory:0.0; Characteristic rolling element frequency, BSF:6.97 Hz; Mass:0.66 kg; Min operating temperature, Tmin:-20 °C; Lw:11 mm; Cage assembly mass:0.2 kg; Db max:66 mm; |
| iso 12240 bearing | Inner/Outer Ring Material:Steel; RoHS:6; Precision (JIS):Grade 0; d:68; D:74; Load Direction:Radial; B:35; Number of Raceway Ring Rows:Double Row; Specifications/Environment:Standard; |
| iso 15243 bearing | Housing Material:[Aluminum Alloy] 201; Width T(mm):25 ～ 60; Shape:Flange Type; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6200; Flange O.D. H(φ):54; Number of Bearings:Double; Days to Ship:7 Days; |
| iso 15 bearing | Appropriate Hydraulic Nut:HMV80; Ro:M6; Weight:41.30 Kg; C:52 mm; L1:210.00 mm; G:Tr400x5; D3:470 mm; C1:66.00 mm; t:9 mm; Lockwasher and Lockplates:MS3080; |
| iso 5753 bearing | EAN:4547359532036; Characteristic outer ring frequency, BPF0:7.76 Hz; d1:71.5 mm; Width:1.193 Inch | 30.302; Dynamic load, C:102 kN; e:0.34; Nlim (grease):4,000 rpm; Bore:2 Inch | 50.8 Millim; B:30.3 mm; Long Description:Cone; Standard Preci; |
| iso din 281 bearing | Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Holder Symbol:No; Special Configurations Code:No; B:107.75; D:300; Specifications/Environment:Standard; Material Symbol:No; Acoustic Symbol:No; |
ISO 492:2014(en), Rolling bearings — Radial bearings
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the
ISO 492 - SiS
STANDARD. ISO. 492. Fourth edition. 2002-04-15. Rolling bearings — Radial bearings —. Tolerances. Roulements — Roulements radiaux — Tolérances
Bearing Tolerances - NTN Global
running accuracy, are regulated by ISO and JIS B 1514 standards .... Notes 1: JIS B 1514, ISO 492 and 199, and DIN 620 have the same specification level
8. bearing tolerances - NSK
ISO 492/199/582 (Accuracies of Rolling Bearings). Tolerances are specified for the following items: Regarding bearing accuracy classes, besides ISO
Bearing Tolerances and Precision Levels | AST Bearings
In almost all cases, these standards are similar to or state equivalency with ISO 492. The table below shows the equivalent tolerance grades for three of the most
ISO 492:2014 - Rolling bearings -- Radial bearings ... - ISO
ISO 492:2014 specifies dimensional and geometrical characteristics, limit deviations from nominal values, and tolerance values to define the interface (except
Tolerances
Tolerance classes and the corresponding values for certain tolerance characteristics are specified in ISO 492 (for radial bearings) and ISO 199 (for thrust
ISO 492:2002 - Rolling bearings — Radial bearings ... - ISO
ISO 492 specifies tolerances for boundary dimensions (except chamfer dimensions) and the running accuracy of radial rolling bearings specified in ISO 15, ISO
ISO 492:2002(en), Rolling bearings — Radial bearings
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible
iso 492 bearing Video