| QM INDUSTRIES QAFY13A206SB Mounted Units & Inserts | rs min:1.5 mm; da min:53 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.38 Hz; Characteristic inner ring frequency, BPFI:4.94 Hz; Fatigue limit load, Cu:1.45 kN; Nlim (grease):7,000 rpm; ra max:1.5 mm; Mass:0.81 kg; |
| QM INDUSTRIES QVVPG14V060SEO Mounted Units & Inserts | da min:87 mm; D:160 mm; d2:91.9 mm; Y2:2.98; Characteristic cage frequency, FTF:0.4 Hz; d:75 mm; Y0:1.96; b:10.5 mm; rs min:2.1 mm; Min operating temperature, Tmin:-40 °C; |
| QM INDUSTRIES QVVPN16V212SEO Mounted Units & Inserts | Designation of bearing:UC207-22G2; A:21 mm; L1:225 mm; d:34.92 mm; C:25.7 kN; H:98 mm; s1:21.45 mm; B:42.9 mm; G:R1/8"; S:17.5 mm; |
| QM INDUSTRIES QMFY08J035SET Mounted Units & Inserts | C:96 kN; d1:120 mm; d:88.9 mm; S:24.5 mm; A5:30.5 mm; T max.:100 °C; C0:71.5 kN; s1:51.5 mm; T min.:-40 °C; B:55 mm; |
| QM INDUSTRIES QMPL08J035ST Mounted Units & Inserts | Max operating temperature, Tmax:120 °C; Rating life coefficient, A2:1; ra max:2 mm; Characteristic inner ring frequency, BPFI:19.26 Hz; Da max:220 mm; C:30 mm; r1s min:2 mm; Nlim (oil):1,800 rpm; Characteristic cage frequency, FTF:0.46 Hz; da max:183 mm; |
| QM INDUSTRIES QVPA28V125SC Mounted Units & Inserts | Designation of housing:PE210-; T max.:100 °C; C:35.1 kN; A1:34 mm; N1:23 mm; L1:61 mm; H2:115 mm; d1:67.2 mm; H:57.2 mm; N:18mm; |
| QM INDUSTRIES QVPG19V304SEO Mounted Units & Inserts | Lw:20.8 mm; Mass:0.03 kg; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Nlim (oil):16,000 rpm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.031; Fw:15 mm; Brand:NTN; D:22 mm; |
| QM INDUSTRIES QVVPN19V303SEO Mounted Units & Inserts | Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; H1:16 mm; A:60 mm; J:118 mm; B:33.4 mm; L1:32 mm; Designation of housing:PAE212-; C:52.5 kN; s1:39 mm; |
| QM INDUSTRIES QMFL08J035SEO Mounted Units & Inserts | L1:72 mm; Designation of housing:FA206-; J1:58 mm; Designation of closed end cover:SCCE206; Dz:70 mm; d1:44.1 mm; s1:34.1 mm; Designation of bearing:EX206G2T20; A2:48.1 mm; Weight:1.07 kg; |
| QM INDUSTRIES QVVPN19V085SM Mounted Units & Inserts | s1:19.05 mm; S:15.9 mm; T min.:-20 °C; A1:12 mm; G:R1/8"; A2:42.2 mm; Weight:1.1 kg; T max.:200 °C; C0:11.2 kN; B:38.1 mm; |