| QM INDUSTRIES QVPG19V085SEO Mounted Units & Inserts | A:31 mm; A1:13 mm; C:15.3 kN; s1:27.8 mm; Designation of housing:SFL206N-; N:13.5mm; T max.:100 °C; e:18 mm; L:80 mm; B1:35.7 mm; |
| QM INDUSTRIES QVPN12V055SN Mounted Units & Inserts | C:9.55 kN; A:30 mm; A1:18 mm; H:30.2 mm; Designation of open end cover:SCOE203-17; C0:4.78 kN; J:47 mm; Dz:46 mm; H2:57 mm; L:63 mm; |
| QM INDUSTRIES QAMH15A300SEN Mounted Units & Inserts | Characteristic cage frequency, FTF:0.42 Hz; Characteristic inner ring frequency, BPFI:10.37 Hz; D1:80.7 mm; d:50 mm; Fatigue limit load, Cu:14.5 kN; d2:59.5 mm; Dynamic load, C:130 kN; Y1:2.84; Radial clearance class:CN; Characteristic rolling element frequency, BSF:6.34 Hz; |
| QM INDUSTRIES QVVPN19V085SEN Mounted Units & Inserts | A2:41.5 mm; T max.:200 °C; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; J:90 mm; e:15 mm; C:12.8 kN; G:M6x1; L:60 mm; C0:6.65 kN; |
| QM INDUSTRIES QAFY08A035SB Mounted Units & Inserts | H:61.3 mm; A1:39.5 mm; C0:29.2 kN; A:60 mm; T min.:-20 °C; H1:23.2 mm; S:11.8 mm; B:45.3 mm; d:55.56 mm; N1:26 mm; |
| QM INDUSTRIES QAFY13A206SB Mounted Units & Inserts | rs min:1.5 mm; da min:53 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.38 Hz; Characteristic inner ring frequency, BPFI:4.94 Hz; Fatigue limit load, Cu:1.45 kN; Nlim (grease):7,000 rpm; ra max:1.5 mm; Mass:0.81 kg; |
| QM INDUSTRIES QMMH18J308SEC Mounted Units & Inserts | Recommended tightening torque for set screw:16.8 Nm; C:66 kN; d:74.61 mm; L:160 mm; G:R1/8"; s1:61.2 mm; T max.:100 °C; Weight:5.8 kg; N:21mm; A2:92.8 mm; |
| QM INDUSTRIES QVPG16V070SEM Mounted Units & Inserts | C0:11.2 kN; A2:40.2 mm; T max.:200 °C; Designation of bearing:UC206-19G2T20; B:38.1 mm; L:80 mm; H:144 mm; N:12mm; J:117 mm; T min.:-20 °C; |
| QM INDUSTRIES QAATU26A415SET Mounted Units & Inserts | H1:14 mm; L1:21 mm; C0:6.65 kN; C:12.8 kN; G:M6x1; N:M8; Weight:0.53 kg; T min.:-20 °C; d:20 mm; H:33.3 mm; |
| QM INDUSTRIES QVF16V215SCN Mounted Units & Inserts | H:42.9 mm; A:38 mm; B:30 mm; C0:11.2 kN; H2:82 mm; Recommended tightening torque for set screw:3.7 Nm; H1:11 mm; C:19.5 kN; Designation of bearing:US206-20G2; E:12.5 mm; |