| QM INDUSTRIES QAPL08A107SET Mounted Units & Inserts | d:30 mm; C0:11.2 kN; A1:27.5 mm; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; C:19.5 kN; B1:48.3 mm; H1:14.5 mm; Dz:70 mm; |
| QM INDUSTRIES QMP08J035SO Mounted Units & Inserts | s1:21.75 mm; S:10.9 mm; J:138 mm; Recommended tightening torque for set screw:11.5 Nm; e:10 mm; L:165 mm; T min.:-40 °C; A:40 mm; H3:110; A4:28 mm; |
| QM INDUSTRIES QMMH18J308SN Mounted Units & Inserts | e:43 mm; Nlim (grease):4,300 rpm; Precision class:P0; Bearing with/without cage:Avec; Cr:21.4 kN; Mass:0.32 kg; Brand:NTN; rs min:0.3 mm; Min operating temperature, Tmin:-20 °C; C:19.8 mm; |
| QM INDUSTRIES QAFY08A035SET Mounted Units & Inserts | Housing Type:2 Bolt Flange; Ball Grade:Class 24; Ball Bearing Housing Series:204 Series; Ring Size:Standard; Housing Material:Polymer; Housing Coating:No Coating; End Cap Groove:Yes; Base to Center Height:Not Applicable; Shaft Attachment (2):D-Lock; Max Bearing Speed:6000 rpm; |
| QM INDUSTRIES QAMH18A085SEM Mounted Units & Inserts | B1:62.7 mm; G:M6x1; d:50 mm; B:49.2 mm; Dz:100 mm; Z:92.5 mm; A:55 mm; T max.:100 °C; H:55.6 mm; Designation of open end cover:SCOE210-50; |
| QM INDUSTRIES QVPN19V085SEM Mounted Units & Inserts | Radial clearance class:C3; Da max:33 mm; da min:19 mm; da max:22.8 mm; Min operating temperature, Tmin:-20 °C; Dynamic load, C:5.8 kN; Static load, C0:3.25 kN; Fatigue limit load, Cu:0.15 kN; Characteristic rolling element frequency, BSF:5.28 Hz; f0:14.4; |
| QM INDUSTRIES QAMH18A307ST Mounted Units & Inserts | Bearing ring (outer ring) GS mass:1.33 kg; rs min:1.5 mm; Brand:NTN; D:155 mm; B:13.5 mm; Max operating temperature, Tmax:120 °C; D1:90 mm; Min operating temperature, Tmin:-20 °C; |
| QM INDUSTRIES QAMH18A307SC Mounted Units & Inserts | H:146 mm; C:43.55 kN; A5:33.4 mm; Dz:110 mm; Designation of housing:T211N-; L1:106 mm; A1:22 mm; L3:95 mm; Weight:4.22 kg; Z:76.8 mm; |
| QM INDUSTRIES QMTU22J408SM Mounted Units & Inserts | Nlim (grease):2,900 rpm; Minimum Buy Quantity:N/A; Product Group:B04144; Nlim (oil):4,400 rpm; Lw:21.8 mm; Ew:98 mm; Characteristic rolling element frequency, BSF:23.46 Hz; Inventory:0.0; Max operating temperature, Tmax:120 °C; Cr:64 kN; |
| QM INDUSTRIES QAFL08A107SET Mounted Units & Inserts | N:12mm; T min.:-20 °C; A:25.5 mm; C0:6.65 kN; S:12.7 mm; C:12.8 kN; A1:6 mm; Recommended tightening torque for set screw:3.7 Nm; B:31 mm; s1:15.5 mm; |