| QM INDUSTRIES QVPA28V415SET Mounted Units & Inserts | Fatigue limit load, Cu:51.7 kN; Max operating temperature, Tmax:200 °C; d:120 mm; Dynamic load, C:446 kN; Number of lubrication holes:3; Da max:171.2 mm; e:0.22; Mass:3.87 kg; Y1:3.14; Nref:3,300 rpm; |
| QM INDUSTRIES QAATU22A407SEC Mounted Units & Inserts | D:32 mm; Dynamic load, C:3.25 kN; Characteristic outer ring frequency, BPF0:5.48 Hz; d:15 mm; Brand:SNR; Axial displacement K Factor:1.14; a:10 mm; Characteristic rolling element frequency, BSF:5.63 Hz; Da max:29.5 mm; Radial rigidity:116 N/µm; |
| QM INDUSTRIES QVPN28V500SM Mounted Units & Inserts | T max.:100 °C; L:180.5 mm; N1:24.5 mm; H2:98.5 mm; A1:34.5 mm; B:42.8 mm; H1:18.5 mm; J:137.5 mm; S:21.4 mm; d1:58 mm; |
| QM INDUSTRIES QVVPG16V212SEM Mounted Units & Inserts | C0:20.8 kN; B:49.2 mm; Designation of open end cover:SCOU209-27; H1:13 mm; Z:70.2 mm; E:25 mm; L1:42 mm; d:42.86 mm; N:M14; S:19 mm; |
| QM INDUSTRIES QVPN16V070SM Mounted Units & Inserts | SW:3 mm; S:15.9 mm; C:19.5 kN; Weight:1.92 kg; H:98 mm; C0:11.2 kN; A5:22.2 mm; G:R1/8"; s1:19.05 mm; Recommended tightening torque for set screw:5.5 Nm; |
| QM INDUSTRIES QAMH18A085SN Mounted Units & Inserts | C0:29.2 kN; S:22.2 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; C:43.55 kN; J:170.5 mm; Designation of housing:PLE211N-; L:219.5 mm; Weight:3.57 kg; H:61.3 mm; |
| QM INDUSTRIES QAMH18A307ST Mounted Units & Inserts | Bearing ring (outer ring) GS mass:1.33 kg; rs min:1.5 mm; Brand:NTN; D:155 mm; B:13.5 mm; Max operating temperature, Tmax:120 °C; D1:90 mm; Min operating temperature, Tmin:-20 °C; |
| QM INDUSTRIES QMMH18J308SEO Mounted Units & Inserts | Nlim (grease):15,100 rpm; Axial rigidity:79.6 N/µm; d1:71.9 mm; Preload level:GN; a:19.4 mm; Dynamic load, C:36.5 kN; Db max:90.5 mm; B:18 mm; Characteristic rolling element frequency, BSF:7.39 Hz; d2:69.3 mm; |
| QM INDUSTRIES QVVPN16V211SEO Mounted Units & Inserts | Nlim:1,800 rpm; Max operating temperature, Tmax:200 °C; Nref:1,200 rpm; Radial clearance class:CN; Y0:2.04; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.92 Hz; ra max:3 mm; Fatigue limit load, Cu:175 kN; Ce min:8 mm; |
| QM INDUSTRIES QVVPN12V055SEO Mounted Units & Inserts | e:10 mm; J:78 mm; Designation of bearing:EX201G2L3; Z:46.2 mm; G:M6x1; Dz:54 mm; Designation of closed end cover:SCCE204; A:25.5 mm; C0:6.65 kN; N:12mm; |