| QM INDUSTRIES QVVPN28V500SM Mounted Units & Inserts | Manufacturer Name:NTN; Min operating temperature, Tmin:-20 °C; Mass:0.47 kg; EAN:4547359008746; Dw:3.18 mm; Bearing with/without cage:Avec; D:62 mm; Category:Ball Bearings; F:38 mm; Characteristic inner ring frequency, BPFI:14.54 Hz; |
| QM INDUSTRIES QVVPG19V303SEC Mounted Units & Inserts | A1:10 mm; A:29.5 mm; G:R1/8"; L:86 mm; S:6 mm; Designation of bearing:US201-08G2; d:12.7 mm; N:11,5mm; e:19 mm; s1:11 mm; |
| QM INDUSTRIES QMF08J035SN Mounted Units & Inserts | S:17 mm; L2:10 mm; A2:21 mm; N2:32 mm; C0:6.65 kN; H:89 mm; C:12.8 kN; SW:3 mm; Recommended tightening torque for set screw:5.5 Nm; Dz:54 mm; |
| QM INDUSTRIES QAATU22A407SEN Mounted Units & Inserts | B:53.7 mm; A5:38.8 mm; Z:60.8 mm; s1:26.85 mm; C:52.5 kN; SW:4.76 mm; Designation of closed end cover:SCC212; Designation of open end cover:SCOU212-36; d:57.15 mm; Dz:120 mm; |
| QM INDUSTRIES QVVPN16V211ST Mounted Units & Inserts | A1:24.5 mm; L:139 mm; S:14.3 mm; J:104.2 mm; H2:67.8 mm; Z:47.3 mm; Recommended tightening torque for set screw:3.7 Nm; d:22.22 mm; G:M6x1; A:36.5 mm; |
| QM INDUSTRIES QVPG14V060SET Mounted Units & Inserts | d:120 mm; ra max:2.5 mm; Brand:NTN; D:260 mm; Nlim (grease):2,600 rpm; da min:133 mm; Max operating temperature, Tmax:120 °C; Static load, C0:185 kN; Dynamic load, C:207 kN; Characteristic inner ring frequency, BPFI:4.87 Hz; |
| QM INDUSTRIES QVVPN14V060SEO Mounted Units & Inserts | J:129 mm; C:25.7 kN; d1:51.1 mm; T min.:-20 °C; Weight:1.74 kg; H2:91.5 mm; d:33.34 mm; H1:16 mm; s1:36.3 mm; S:18.8 mm; |
| QM INDUSTRIES QMMH15J075ST Mounted Units & Inserts | D:19 mm; Nlim (grease):10,000 rpm; C0r:5.4 kN; B2:20 mm; Min operating temperature, Tmin:-20 °C; e:14 mm; Characteristic inner ring frequency, BPFI:8.48 Hz; Dw:1.5 mm; Category:Bearings; C:11 mm; |
| QM INDUSTRIES QVPG19V085SO Mounted Units & Inserts | s1:26.85 mm; Z:91.3 mm; S:14.9 mm; A:70 mm; Designation of closed end cover:SCC212; G:M6x1; N:M16; d:61.91 mm; Designation of open end cover:SCOU212-39; H2:138 mm; |
| QM INDUSTRIES QAMH18A304SEC Mounted Units & Inserts | Y2:2.98; Ce min:6 mm; k:5 mm; e:0.34; D:150 mm; Number of lubrication holes:3; Brand:SNR; rs min:2.1 mm; d:70 mm; D1:128.7 mm; |