| QM INDUSTRIES QAATU26A415SET Mounted Units & Inserts | H1:14 mm; L1:21 mm; C0:6.65 kN; C:12.8 kN; G:M6x1; N:M8; Weight:0.53 kg; T min.:-20 °C; d:20 mm; H:33.3 mm; |
| QM INDUSTRIES QMMH18J308SEC Mounted Units & Inserts | Recommended tightening torque for set screw:16.8 Nm; C:66 kN; d:74.61 mm; L:160 mm; G:R1/8"; s1:61.2 mm; T max.:100 °C; Weight:5.8 kg; N:21mm; A2:92.8 mm; |
| QM INDUSTRIES QVVPG16V070SEM Mounted Units & Inserts | G:M6x1; T max.:100 °C; s1:15.5 mm; S:12.7 mm; C:12.8 kN; E:16 mm; J:49 mm; L:70 mm; B:31 mm; Designation of open end cover:SCO204-12; |
| QM INDUSTRIES QMMH15J075SEB Mounted Units & Inserts | P:230 mm; A:37 mm; H:102 mm; s1:36.3 mm; G:M6x1; d1:51.1 mm; N:22mm; H1:89 mm; L2:13 mm; S:18.8 mm; |
| QM INDUSTRIES QAMH15A070SEC Mounted Units & Inserts | Z:45 mm; C:12.8 kN; T max.:100 °C; N1:19 mm; G:M6x1; A:38 mm; T min.:-40 °C; d:20 mm; A1:22 mm; B:31 mm; |
| QM INDUSTRIES QAF08A107SEM Mounted Units & Inserts | C0:19.2 kN; s1:36.55 mm; B:38.1 mm; A2:53.3 mm; J:141 mm; G:M6x1; H:185 mm; T min.:-40 °C; d1:55 mm; C:33.5 kN; |
| QM INDUSTRIES QVVPG19V303SEC Mounted Units & Inserts | A1:10 mm; A:29.5 mm; G:R1/8"; L:86 mm; S:6 mm; Designation of bearing:US201-08G2; d:12.7 mm; N:11,5mm; e:19 mm; s1:11 mm; |
| QM INDUSTRIES QAFY13A206SB Mounted Units & Inserts | rs min:1.5 mm; da min:53 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.38 Hz; Characteristic inner ring frequency, BPFI:4.94 Hz; Fatigue limit load, Cu:1.45 kN; Nlim (grease):7,000 rpm; ra max:1.5 mm; Mass:0.81 kg; |
| QM INDUSTRIES QVPG19V304SEO Mounted Units & Inserts | Lw:20.8 mm; Mass:0.03 kg; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Nlim (oil):16,000 rpm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.031; Fw:15 mm; Brand:NTN; D:22 mm; |
| QM INDUSTRIES QAAMH18A085SEO Mounted Units & Inserts | d1:102 mm; n:260 mm; A1:80 mm; housing weight:75 kg; a:582.5 mm; Brand:SNR; Cover bolts:M8x30; a1:595 mm; oil quantity:800 Volume_cmc; c:30 mm; |