| QM INDUSTRIES QMTU26J130ST Mounted Units & Inserts | T min.:-20 °C; A:41.5 mm; Recommended tightening torque for set screw:5.5 Nm; H:39.7 mm; H1:14.5 mm; Weight:0.92 kg; T max.:200 °C; B:38.1 mm; L:161.5 mm; Z:18.9 mm; |
| QM INDUSTRIES QVPN12V055SB Mounted Units & Inserts | B:18 mm; Nref:7,600 rpm; d1:71.2 mm; D:95 mm; D1:85.9 mm; Characteristic cage frequency, FTF:0.43 Hz; Fatigue limit load, Cu:1.1 kN; Nlim:11,000 rpm; Brand:SNR; Mass:0.38 kg; |
| QM INDUSTRIES QVPN12V055SN Mounted Units & Inserts | C:9.55 kN; A:30 mm; A1:18 mm; H:30.2 mm; Designation of open end cover:SCOE203-17; C0:4.78 kN; J:47 mm; Dz:46 mm; H2:57 mm; L:63 mm; |
| QM INDUSTRIES QVPN19V085SEM Mounted Units & Inserts | Radial clearance class:C3; Da max:33 mm; da min:19 mm; da max:22.8 mm; Min operating temperature, Tmin:-20 °C; Dynamic load, C:5.8 kN; Static load, C0:3.25 kN; Fatigue limit load, Cu:0.15 kN; Characteristic rolling element frequency, BSF:5.28 Hz; f0:14.4; |
| QM INDUSTRIES QMMH18J304SEC Mounted Units & Inserts | D:47 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:4.92 Hz; Fatigue limit load, Cu:0.3 kN; Characteristic cage frequency, FTF:0.38 Hz; rs min:1 mm; Characteristic rolling element frequency, BSF:4.12 Hz; da min:25 mm; Brand:NTN; Nlim (grease):16,000 rpm; |
| QM INDUSTRIES QMMH15J075ST Mounted Units & Inserts | D:19 mm; Nlim (grease):10,000 rpm; C0r:5.4 kN; B2:20 mm; Min operating temperature, Tmin:-20 °C; e:14 mm; Characteristic inner ring frequency, BPFI:8.48 Hz; Dw:1.5 mm; Category:Bearings; C:11 mm; |
| QM INDUSTRIES QMMH18J303SM Mounted Units & Inserts | N:10mm; L1:54 mm; T max.:200 °C; C0:6.65 kN; A:25.5 mm; A1:12 mm; Weight:0.5 kg; A2:33.3 mm; Designation of bearing:UC202-10G2T20; T min.:-20 °C; |
| QM INDUSTRIES QVPA28V125SC Mounted Units & Inserts | Designation of housing:PE210-; T max.:100 °C; C:35.1 kN; A1:34 mm; N1:23 mm; L1:61 mm; H2:115 mm; d1:67.2 mm; H:57.2 mm; N:18mm; |
| QM INDUSTRIES QVPG16V070SEM Mounted Units & Inserts | C0:11.2 kN; A2:40.2 mm; T max.:200 °C; Designation of bearing:UC206-19G2T20; B:38.1 mm; L:80 mm; H:144 mm; N:12mm; J:117 mm; T min.:-20 °C; |
| QM INDUSTRIES QVVPG14V060SEO Mounted Units & Inserts | da min:87 mm; D:160 mm; d2:91.9 mm; Y2:2.98; Characteristic cage frequency, FTF:0.4 Hz; d:75 mm; Y0:1.96; b:10.5 mm; rs min:2.1 mm; Min operating temperature, Tmin:-40 °C; |