| QM INDUSTRIES QVVPN19V085SM Mounted Units & Inserts | s1:19.05 mm; S:15.9 mm; T min.:-20 °C; A1:12 mm; G:R1/8"; A2:42.2 mm; Weight:1.1 kg; T max.:200 °C; C0:11.2 kN; B:38.1 mm; |
| QM INDUSTRIES QAFY13A206SB Mounted Units & Inserts | rs min:1.5 mm; da min:53 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.38 Hz; Characteristic inner ring frequency, BPFI:4.94 Hz; Fatigue limit load, Cu:1.45 kN; Nlim (grease):7,000 rpm; ra max:1.5 mm; Mass:0.81 kg; |
| QM INDUSTRIES QMCW08J035SN Mounted Units & Inserts | T max.:200 °C; A:63 mm; A4:45 mm; J:208 mm; e:18 mm; S:34.1 mm; L:250 mm; A1:20 mm; H3:180; A2:69.6 mm; |
| QM INDUSTRIES QAMH18A085SN Mounted Units & Inserts | C0:29.2 kN; S:22.2 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; C:43.55 kN; J:170.5 mm; Designation of housing:PLE211N-; L:219.5 mm; Weight:3.57 kg; H:61.3 mm; |
| QM INDUSTRIES CKDR070MM Mounted Units & Inserts | D1:50 mm; B:9.5 mm; Min operating temperature, Tmin:-20 °C; Bearing ring (outer ring) GS mass:0.56 kg; Max operating temperature, Tmax:120 °C; D:110 mm; Brand:NTN; rs min:1.5 mm; |
| QM INDUSTRIES QVVPN16V211SEO Mounted Units & Inserts | Nlim:1,800 rpm; Max operating temperature, Tmax:200 °C; Nref:1,200 rpm; Radial clearance class:CN; Y0:2.04; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.92 Hz; ra max:3 mm; Fatigue limit load, Cu:175 kN; Ce min:8 mm; |
| QM INDUSTRIES QAMH18A090ST Mounted Units & Inserts | L:125 mm; A1:8 mm; A2:32 mm; B:30 mm; Weight:1.29 kg; Designation of bearing:US206-19G2T04; Dz:70 mm; J:100 mm; T max.:100 °C; H3:80; |
| QM INDUSTRIES QVPG19V080SO Mounted Units & Inserts | Recommended tightening torque for set screw:16.8 Nm; Weight:6.72 kg; N:22mm; A1:44 mm; C:62 kN; s1:57.6 mm; H:79.4 mm; d:68.26 mm; N1:28 mm; L:260 mm; |
| QM INDUSTRIES QVPN12V055ST Mounted Units & Inserts | Base to Center Height:Standard; Seal Type:Triple Lip; Self Aligning:Self Centering; End Cap Groove:Yes; Max Bearing Speed:3250 rpm; Bearing Insert Material:Steel; Ball Grade:Class 10; Ship Weight:9 LB; Retainer Type:Max Life Cage; Ball Material:Steel; |
| QM INDUSTRIES QAMH18A307ST Mounted Units & Inserts | Bearing ring (outer ring) GS mass:1.33 kg; rs min:1.5 mm; Brand:NTN; D:155 mm; B:13.5 mm; Max operating temperature, Tmax:120 °C; D1:90 mm; Min operating temperature, Tmin:-20 °C; |