| QM INDUSTRIES CK19T085S Mounted Units & Inserts | H2:91.5 mm; T min.:-40 °C; Z:22.5 mm; B:32 mm; A1:30.5 mm; Designation of housing:PLE207N-; H1:16 mm; T max.:100 °C; N:14mm; J:129 mm; |
| QM INDUSTRIES QVPG19V085SEO Mounted Units & Inserts | A:31 mm; A1:13 mm; C:15.3 kN; s1:27.8 mm; Designation of housing:SFL206N-; N:13.5mm; T max.:100 °C; e:18 mm; L:80 mm; B1:35.7 mm; |
| QM INDUSTRIES QVPA28V415SET Mounted Units & Inserts | Fatigue limit load, Cu:51.7 kN; Max operating temperature, Tmax:200 °C; d:120 mm; Dynamic load, C:446 kN; Number of lubrication holes:3; Da max:171.2 mm; e:0.22; Mass:3.87 kg; Y1:3.14; Nref:3,300 rpm; |
| QM INDUSTRIES QMFY08J035SET Mounted Units & Inserts | C:96 kN; d1:120 mm; d:88.9 mm; S:24.5 mm; A5:30.5 mm; T max.:100 °C; C0:71.5 kN; s1:51.5 mm; T min.:-40 °C; B:55 mm; |
| QM INDUSTRIES QVPN12V055SB Mounted Units & Inserts | B:18 mm; Nref:7,600 rpm; d1:71.2 mm; D:95 mm; D1:85.9 mm; Characteristic cage frequency, FTF:0.43 Hz; Fatigue limit load, Cu:1.1 kN; Nlim:11,000 rpm; Brand:SNR; Mass:0.38 kg; |
| QM INDUSTRIES QAMH15A211SC Mounted Units & Inserts | Characteristic cage frequency, FTF:0.38 Hz; da min:43 mm; d:35 mm; Mass:0.46 kg; Characteristic rolling element frequency, BSF:4.03 Hz; Min operating temperature, Tmin:-25 °C; Static load, C0:19.1 kN; Characteristic outer ring frequency, BPF0:3.06 Hz; B:21 mm; Dynamic load, C:33.5 kN; |
| QM INDUSTRIES QVVPG16V070SEC Mounted Units & Inserts | S:19 mm; s1:24.6 mm; Designation of housing:T209-; L:144 mm; Recommended tightening torque for set screw:8 Nm; L2:16 mm; C:31.85 kN; B:49.2 mm; T min.:-40 °C; P:300 mm; |
| QM INDUSTRIES QMMH18J308SN Mounted Units & Inserts | e:43 mm; Nlim (grease):4,300 rpm; Precision class:P0; Bearing with/without cage:Avec; Cr:21.4 kN; Mass:0.32 kg; Brand:NTN; rs min:0.3 mm; Min operating temperature, Tmin:-20 °C; C:19.8 mm; |
| QM INDUSTRIES QMTU26J125SEM Mounted Units & Inserts | ras max:0.3 mm; C0r:2.28 kN; Nlim (oil):37,000 rpm; C:8 mm; Precision class:P0; Characteristic outer ring frequency, BPF0:3.2 Hz; Lw:5.8 mm; D:13 mm; rs min:0.3 mm; Mass:0.006 kg; |
| QM INDUSTRIES QAATU22A407SEC Mounted Units & Inserts | D:32 mm; Dynamic load, C:3.25 kN; Characteristic outer ring frequency, BPF0:5.48 Hz; d:15 mm; Brand:SNR; Axial displacement K Factor:1.14; a:10 mm; Characteristic rolling element frequency, BSF:5.63 Hz; Da max:29.5 mm; Radial rigidity:116 N/µm; |