| QM INDUSTRIES QAATU26A130SC Mounted Units & Inserts | Dynamic load, C:131 kN; Inventory:0.0; db min:75 mm; B:28 mm; Manufacturer Name:NTN; Fatigue limit load, Cu:19.1 kN; Weight / Kilogram:1.06; E:100 mm; Nlim (oil):6,100 rpm; ra max:1.5 mm; |
| QM INDUSTRIES QAF08A107SEM Mounted Units & Inserts | C0:19.2 kN; s1:36.55 mm; B:38.1 mm; A2:53.3 mm; J:141 mm; G:M6x1; H:185 mm; T min.:-40 °C; d1:55 mm; C:33.5 kN; |
| QM INDUSTRIES QMFY08J035SET Mounted Units & Inserts | C:96 kN; d1:120 mm; d:88.9 mm; S:24.5 mm; A5:30.5 mm; T max.:100 °C; C0:71.5 kN; s1:51.5 mm; T min.:-40 °C; B:55 mm; |
| QM INDUSTRIES QVVPG19V080SET Mounted Units & Inserts | ra max:1 mm; Brand:NTN; Characteristic rolling element frequency, BSF:4.71 Hz; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; Da max:47 mm; Max operating temperature, Tmax:110 °C; rs min:1 mm; B:15 mm; |
| QM INDUSTRIES QMFL08J035SEO Mounted Units & Inserts | L1:72 mm; Designation of housing:FA206-; J1:58 mm; Designation of closed end cover:SCCE206; Dz:70 mm; d1:44.1 mm; s1:34.1 mm; Designation of bearing:EX206G2T20; A2:48.1 mm; Weight:1.07 kg; |
| QM INDUSTRIES QMTU26J130ST Mounted Units & Inserts | T min.:-20 °C; A:41.5 mm; Recommended tightening torque for set screw:5.5 Nm; H:39.7 mm; H1:14.5 mm; Weight:0.92 kg; T max.:200 °C; B:38.1 mm; L:161.5 mm; Z:18.9 mm; |
| QM INDUSTRIES QMMH18J308SN Mounted Units & Inserts | e:43 mm; Nlim (grease):4,300 rpm; Precision class:P0; Bearing with/without cage:Avec; Cr:21.4 kN; Mass:0.32 kg; Brand:NTN; rs min:0.3 mm; Min operating temperature, Tmin:-20 °C; C:19.8 mm; |
| QM INDUSTRIES QVPG19V304SEO Mounted Units & Inserts | Lw:20.8 mm; Mass:0.03 kg; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Nlim (oil):16,000 rpm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.031; Fw:15 mm; Brand:NTN; D:22 mm; |
| QM INDUSTRIES QAMH18A307SC Mounted Units & Inserts | H:146 mm; C:43.55 kN; A5:33.4 mm; Dz:110 mm; Designation of housing:T211N-; L1:106 mm; A1:22 mm; L3:95 mm; Weight:4.22 kg; Z:76.8 mm; |
| QM INDUSTRIES CKDR130MM Mounted Units & Inserts | S:10.2 mm; A5:31 mm; B:41.2 mm; A:49 mm; L3:83 mm; C0:20.8 kN; Weight:2.37 kg; L:144 mm; T min.:-20 °C; Designation of bearing:US209-28G2; |