| QM INDUSTRIES QAATU22A407SEC Mounted Units & Inserts | D:32 mm; Dynamic load, C:3.25 kN; Characteristic outer ring frequency, BPF0:5.48 Hz; d:15 mm; Brand:SNR; Axial displacement K Factor:1.14; a:10 mm; Characteristic rolling element frequency, BSF:5.63 Hz; Da max:29.5 mm; Radial rigidity:116 N/µm; |
| QM INDUSTRIES QAF08A107SEM Mounted Units & Inserts | C0:19.2 kN; s1:36.55 mm; B:38.1 mm; A2:53.3 mm; J:141 mm; G:M6x1; H:185 mm; T min.:-40 °C; d1:55 mm; C:33.5 kN; |
| QM INDUSTRIES QVVPN19V085SM Mounted Units & Inserts | s1:19.05 mm; S:15.9 mm; T min.:-20 °C; A1:12 mm; G:R1/8"; A2:42.2 mm; Weight:1.1 kg; T max.:200 °C; C0:11.2 kN; B:38.1 mm; |
| QM INDUSTRIES QAATU26A130SC Mounted Units & Inserts | Dynamic load, C:131 kN; Inventory:0.0; db min:75 mm; B:28 mm; Manufacturer Name:NTN; Fatigue limit load, Cu:19.1 kN; Weight / Kilogram:1.06; E:100 mm; Nlim (oil):6,100 rpm; ra max:1.5 mm; |
| QM INDUSTRIES QVVPN12V055SEO Mounted Units & Inserts | e:10 mm; J:78 mm; Designation of bearing:EX201G2L3; Z:46.2 mm; G:M6x1; Dz:54 mm; Designation of closed end cover:SCCE204; A:25.5 mm; C0:6.65 kN; N:12mm; |
| QM INDUSTRIES QVVPG19V080SET Mounted Units & Inserts | ra max:1 mm; Brand:NTN; Characteristic rolling element frequency, BSF:4.71 Hz; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; Da max:47 mm; Max operating temperature, Tmax:110 °C; rs min:1 mm; B:15 mm; |
| QM INDUSTRIES QVVPN16V212SEO Mounted Units & Inserts | Designation of bearing:UC207-22G2; A:21 mm; L1:225 mm; d:34.92 mm; C:25.7 kN; H:98 mm; s1:21.45 mm; B:42.9 mm; G:R1/8"; S:17.5 mm; |
| QM INDUSTRIES QVVPN19V085SEN Mounted Units & Inserts | A2:41.5 mm; T max.:200 °C; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; J:90 mm; e:15 mm; C:12.8 kN; G:M6x1; L:60 mm; C0:6.65 kN; |
| QM INDUSTRIES QVVPG14V060SEO Mounted Units & Inserts | da min:87 mm; D:160 mm; d2:91.9 mm; Y2:2.98; Characteristic cage frequency, FTF:0.4 Hz; d:75 mm; Y0:1.96; b:10.5 mm; rs min:2.1 mm; Min operating temperature, Tmin:-40 °C; |
| QM INDUSTRIES QMMH18J308SEC Mounted Units & Inserts | Recommended tightening torque for set screw:16.8 Nm; C:66 kN; d:74.61 mm; L:160 mm; G:R1/8"; s1:61.2 mm; T max.:100 °C; Weight:5.8 kg; N:21mm; A2:92.8 mm; |